Motor Cycle

Yamaha FZ 1 2010

Tighten the engine mount bolt to the factory specifications - DO NOT OVERTIGHTEN. Install the other slider using the new bolt, nut and washers (supplied in this kit) with one washer under the bolt head.

same place as the other side). Remove the right side engine mount bolt. Tighten the engine mount bolt to the supplied locknut - DO NOT OVERTIGHTEN.

Install the longer slider using the new bolt and washer with one washer under the bolt head.Remove the left-side engine mount bolt as seen in the left picture.

Instructions:It is highly recommended that you refer to your service manual before performing this installation. These frame sliders are designed to fit specific engine mounts of your 2004-5 Yamaha FZ1. Please read all instructions before beginning work!

Sportsriders around the world who have tested various models of our products on the track have all given their thumbs up after experiencing first hand, the benefits of Motovation Frame Sliders. They are tough but not brittle and can also absorb a huge impact. Each and every model is tested for drop and slide protection. Motovation frame sliders are designed and manufactured by a company that only makes frame sliders.

This frame slider kit has been designed to offer unsurpassed protection to your 2004-5 Yamaha FZ1000 in the unfortunate event of a lowside or tip over.

LinkWithin

Related Posts Plugin for WordPress, Blogger...
Motor Cycle
Motor Cycle
Msn bot last visit powered by Scriptme